This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.
Good day to you all. Now, today we’ve got a review of ten of the best aluminum floor jacks for garage use. If you do any underbody vehicle maintenance either as a professional or even for just the occasional lift, you will know that you really need a quick and easily operated jack.
It should be lightweight and maneuverable, whilst being safe and secure to use. Aluminum nowadays is as tough and durable as steel but is so much lighter, therefore much more movable for something such as a workshop floor jack.
So, let’s take a look at our choices and help you decide which is the best aluminum Floor Jacks for garage use…
- Top 10 Best Aluminum Floor Jacks For Garage Use In 2021 Reviews
- Best Aluminum Floor Jacks for garage use Buyers Guide
- So, What’s The Best Aluminum Floor Jacks For Garage Use?
Top 10 Best Aluminum Floor Jacks For Garage Use In 2021 Reviews
1 JEGS Floor Jack
The JEGS low-profile floor jack has a lifting capacity of 3 tons so is able to lift not just automobiles but pickups, light vans and SUVs too. It is made of lightweight aluminum, but its lift range is anything but lightweight! This jack has been tested to meet all safety standards.
The lift range at its lowest is 3 ½ inches so if your vehicle is a lowered custom, racing car or an exotic supercar then this jack will be able to slip under and lift your ride. At the other end, this jack’s maximum lift height is up to 19 ¼ inches. This will provide adequate working room underneath.
With a chassis length of 26 ½ inches, it will reach far under your vehicle. One last spec is the width, at 12 inches wide it will give good support whilst working.
The JEGS jack features low-profile front rollers that allow for a quick and accurate placement under your vehicle bodywork. Dual side handles aid in maneuvering and positioning this jack.
The saddle is a nice feature of the unit. Firstly it can rotate 360 degrees which not all jacks on the market can do. Plus, it is totally covered in a protective rubber padding to prevent marring your under bodywork.
The pads diameter is a nice size at 4 9/16 inches. The handle breaks into two pieces. When joined together it has a 50-inch length. It is covered in a rubber sleeve with a knurled grip to reduce slipping, and it is comfortable to use.
For extra safety, it is fitted with overload and bypass valves to prevent the overloading of the jack’s capabilities. There are protective seals to keep the hydraulic system free from contaminants. Lastly, the jack has a weight of 58 lbs.
- A capable jack with good safety features.
- 360-degree rotating saddle.
- Nice low profile lifting range.
- The side handles, though good for adjusting the jack’s position under the car are not placed centrally. So when carrying the jack, it is top heavy.
2 Powerzone Jack
Here we have another jack with a 3-ton lifting capacity. This is made with a lightweight aluminum frame to increase portability by keeping the weight down to just 59 lbs. The lifting arm is made from heavy-duty steel to increase the strength and durability for it’s working life.
The lift range of this jack is from a low of 4 inches up to a maximum lift of 18 ¼ inches high. The Powerzone Jack features a quick lift hydraulic system for a rapid and easy lift. And, a built-in safety valve will prevent overloading the jack beyond the 3-ton lifting capacity.
A two-piece handle has a protective rubber grip to avoid scrapes to your vehicle. The saddle does not rotate. It is, however, covered with a protective rubber pad to avoid marking your vehicles underbody frame. Rear wheels swivel easily, allowing for accurate positioning.
The two side mounted handles can also be used to pinpoint your required position. These are centrally mounted, so the jack will remain level when you are carrying it about.
We would like to point out that the release for this jack is reported by certain buyers to have a very small point of turn for a slow descend. If you turn just a bit too much, the jack may let go quicker than you would like it too.
- A good strong jack.
- It has a quick lift feature.
- As said in the review, the point of release is very small between slow and quick lowering.
3 Sunex Floor Jack
The Sunex floor jack has a 3-ton lifting capacity. We have here a jack with a very wide stance of 15 inches so you can expect a very stable and solid lift from this product. The chassis length is 31.7 inches so has a good reach under your vehicle.
This jack, although is not low profile, has a lift height of up to 19.3 inches. That will give you ample workspace under your sedan, pickup or SUV.
This jack features rapid rise technology to allow the maximum height to be reached in just 7 ½ quick and easy pumps. The jack handle itself comes in two pieces. It has a quick lock feature for easy assembly or release. The handle has a protective coating for bodywork damage avoidance.
The wide track front wheels and the rear mounted ball bearing swivel wheels allow for easy maneuverability. Side mounted handles are fitted for that extra precision positioning. The saddle is rubber coated with a tread for that extra grip to your vehicle’s underframe.
It is fully 360-degree rotation. There is a nice touch with the addition of a foam front bumper pad for protection against any knocks.
This jack weighs in at 50lbs. It can be carried by either side handle though they are not central so it won’t be level which can make things awkward sometimes. The thick frame side plates add strength while the lift arm is reinforced as well.
Chassis torsion control is fitted. There are wiper seals in place to protect the hydraulic system from contaminants. For added safety overload and bypass valves will prevent this jack from lifting beyond its rated capacity.
- The wide stance gives a feeling of stability.
- Built-in safety features will prevent overuse or misuse.
- A larger jack than some on this review it will need extra storage space.
- The side handles, though good for adjusting the jack’s position under the car are not placed centrally. So when carrying the jack, it is top heavy.
4 OTC Racing Jack
We have here a super strong and super light workshop trolley jack. This is made using aircraft-grade aluminum for super strength. As such the OTC jack’s weight is of just 43 lbs. Easily making this a speedy and maneuverable jack to use.
It has a low profile lift down to as low as 3 ½ inches. So for ground-hugging, high-performance motorcars this is the perfect jack to reach under the body and lift it quickly. With just five pumps of the handle raising it to the full lifting height of 18 inches this jack really speeds things along.
The OTC racing jack has a lifting capacity of 2 tons. The ease of the lift is aided by a 45-inch long two-piece handle. It snaps together for an easy and quick setup. However, this handle comes in bare aluminum, so there is no protection against accidental knocks to your car bodywork.
The jack itself has a dual pump piston system in place which is what enables such a smooth and quick lift.
The saddle is covered in a protective rubber to prevent slipping or framework damage and is removable. It does not rotate though. It is fixed to the lifting arm. There are side mounted handles installed for underbody positioning and for carrying.
- It is a very lightweight jack.
- Very quick raising with just five pumps from lowest to highest positions.
- The handle has no kind of protection for bodywork of a grip pad.
- The saddle does not rotate.
5 Arcan ALJ2T Floor Jack
We will now take a look at the Arcan floor jack. This model has a lifting capacity of 2 tons. It is of professional quality aluminum construction and weighs in at 50 lbs. This is a low-profile jack that has a lift range from 3 ½ inches up to a height of 19 ¼ inches.
It is, therefore, a suitable jack for you if your vehicle is a lowered custom, a racer or even a high-performance supercar. When raised to the maximum, the lift height of this jack will allow for a good work space beneath your vehicle.
This jack features thick, strong frame side plates. The lift arm is reinforced for added strength. The chassis comes complete with torsion control. All for added durability.
There is a two-stage quick lift in place with dual pump pistons giving you a fast-rising action. The pistons are protected by dust shields to protect them from contaminants.
For your added safety there are bypass and overload valves which will prevent over-extension of the hydraulic ram beyond the maximum capacity.
A two-piece handle comes with a rubber sleeve to avoid slippage. However, it is not covered enough to keep your vehicle bodywork safe from a scratch if dropped accidentally.
The jack is easily positioned under your car with the aid of side mounted handles suitable for carrying it too. Ball bearing mounted rear wheel casters, and wide track front wheels make for an easy motion. A rubber covered saddle pad will keep from scraping underbody framework.
- This jack has a good lift height of almost 20 inches.
- Good safety features are fitted.
- The handle could do with some more covering to protect from bodywork damage.
6 Performance Tool Jack
Next up, we have a larger, heavy-duty trolly jack which is able to lift up to 3 ½ tons. This is a great jack for not just sedans, but it is fully able to lift pickups, SUVs and light vans all with ease. The lift range is from a low of 4 inches to a very noble maximum raise height of 20 ½ inches.
So it won’t be able to slip under the real low-profile cars. But, with a lift so high it will give you more than enough underbody workspace for your required job. It is a heavier jack though and has a weight of 85 lbs. So this isn’t as portable as some of the other jacks in this review.
Many features are built within this jack. Most importantly for safety, it has an overload bypass protection valve to prevent lifting above the maximum capacity. An extra long frame of 32 inches is designed for good stability as well as giving you a long reach under your vehicle’s frame.
The frame is of a high-quality construction for the extra strength needed to lift up the heaviest of trucks or vans. This jack has dual pump action for that quick and easy lift.
Swivel caster wheels allow for easy movement. We did see, however, that this jack does not have side handles fitted. Considering the weight of this jack, we feel this is something it should surely have. Not so much for carrying but for positioning under the car. It could prove tricky without these to aid you.
The saddle is rubber padded for grip and underbody protection.
- A strong heavy jack probably more suited to the professional to be kept in a workshop.
- This jack has a very good maximum height capacity.
- Due to this jack’s weight, it won’t be an easy one to carry about.
- No side handles may prove a hinder to positioning accurately under your vehicle.
7 Arcan ALJ3T Floor Jack
This Arcan Floor Jack’s low profile allows it to slide under vehicles as low as 3 ¾ inches. The maximum lift height is 18 ⅛ inches so allows for a good level of room to work once your vehicle has been elevated and secured with jack stands.
It is a strong enough jack to lift cars, pickups or SUVs of up to 3 tons safely. It is fairly wide at 13 ½ inches which will add to the stability of this jack. There is a good underbody reach as well, being able to reach under a vehicle up to 30 inches.
The jack’s construction is of aircraft grade lightweight aluminum. The total weight of the jack is 56 lbs. The lifting arm is reinforced, and there is chassis torsion control in place for increased strength and durability.
Hefty side plates add to the jack’s toughness. There are also bypass and overload valves so as not to use this jack beyond its abilities. Dual pump pistons allow for a fast-rising motion and are protected from outside elements with dust shields.
This jack does have side mounted handles to help with underbody positioning as well as for carrying. The jacking handle comes in two pieces and is easily fitted together or broken apart for storing. The handle is covered in a foam sleeve to avoid accidental bodywork damage.
The rubber saddle is nice and large. It is also fully rotational which we like.
- A well-supported aluminum jack.
- The saddle fully rotates and is of a good size.
- Once again we find a jack that has the side handles not centrally positioned.
8 Powerzone Garage Jack
The Powerzone is a jack with a rated lifting capacity of up to 3 tons, but, is not suited to the lifting of lower slung custom or high-performance vehicles. It is able to range from 4 inches up to 18 ¼ inches high. Therefore, this jack has less lifting range than the other jacks have in this review.
However, that being said, it does not make this jack any less suitable for most workshop lift requirements. It is still fully capable of raising all manner of cars, pickups, and SUVs.
Here we have a jack that is constructed with a lightweight aluminum chassis frame. This aids in increasing portability by keeping the products weight down. At the same time, the Powerezone is equipped with a heavy-duty reinforced lift arm for added strength and durability.
The weight of this jack is 59 lbs.
There is a quick lifting hydraulic system in place for helping with a speedy lift. It also features a safety valve to prevent lifting above the rated capacity. A two-piece handle has a protective padded cover. The rubber gripped saddle provides extra grip to your car body’s framework.
The rear swivel wheels allow for easy positioning. Centrally placed grab handles give extra exact positioning as well as for easy carrying.
- The combination of using a steel and aluminum construction results in extra strength while keeping the weight low.
- A good, strong jack.
- This jack does not have the low to high lift range that other jacks have in this review.
- There seems to be an issue with the handle joint as buyers have claimed it is not easy to secure and then take apart.
- The jack has a very small bite rang for lowering vehicles slowly.
9 NOS Service Jack
Here is an aluminum jack with a lifting capacity of up to 3 tons. This NOS jack is super lightweight and weighs amazingly little at just 27 lbs. It is of an all aluminum construction. While super light, it is still a very hardy unit.
Thick frame side plates give the jack stable support. And, a reinforced lift arm is in place for added strength. Chassis torsion control is a fitted feature for securing stability.
This jack has a lifting height range from its lowest point of 3 and ¾ inches. The fully extended lift height is 18.125 inches. A safety valve is fitted for the avoidance of overloading the jack. Dual pumps are fitted for a rapid lifting process.
There is also a universal joint release mechanism which claims to give precise speed control for the lowering of your vehicle safely.
A two-piece handle is supplied that fits together easily. It is coated with a rubber bumper pad for the protection of any bodywork knocks. The pad saddle is also coated with a rubber grip tread patterned pad.
The two handles are not centrally mounted to the jack chassis but still allow for easy lifting as well as precise underbody positioning. Rear wheels swivel for movability, they are not however made from metal but are of nylon construction.
- Very lightweight unit.
- Easy to move and carry about.
- Nylon wheels are fitted not metal, so they are not so hard wearing.
10 Performance Tool Floor Jack and Jack Stands
The last jack in our review is from Performance Tool. This is actually a package deal that is supplied with two jack stands. For this review though, we will be focusing on just the jack itself.
A slightly smaller jack than the others we have looked at. And, the lifting capacity is only up to 3000 lbs or 1 ½ tons. So, this makes the lifting of larger trucks or SUVs more than likely not possible.
It does, however, have a very low profile and is able to manage the sliding under of vehicles as low as 3 and ⅝ inches. So, if you are the owner of a low slung performance car of lowrider; this is a very good jack for you.
With a lift height able to reach up to 17 ½ inches it does not have the stretch of other jacks we have looked at on here.
Using aircraft quality aluminum construction allows for a heavy duty but lightweight jack that weighs just 38.9 lbs. The frame is reinforced so will not compromise the integrity of the jack.
Features included in the jack design are firstly, a rapid rise pump system that takes just 5 pumps from the lowest to highest positions. And, an overload protection bypass valve will prevent over lifting the jack’s maximum lift capacity.
A gripped rubber padded saddle rotates 360 degrees and will prevent marring underbody work, which we always like to see. The handle too has a rubber grip and is 40 inches long. This is a one piece lift arm.
Carry handles are fitted but once again they are not centrally mounted. They do however aid in the positioning and the maneuvering of the jack under your vehicle. Rear swivel wheels help for this process too.
- Good lightweight jack.
- Very low-profile lifting abilities.
- The lifting capacity of 1.5 tons means this jack won’t lift larger vehicles.
- The lifting height is a bit on the low side.
Best Aluminum Floor Jacks for garage use Buyers Guide
So, what do you need to be looking for when buying a workshop floor jack?
Versatility For Starters…
Not so long ago most workshop trolley jacks available to buy were big cumbersome units. They were really not that easy to move about. Either for positioning under your vehicle or carrying from place to place, certainly not without a struggle.
Times and expectations have changed considerably. These days many more manufacturers are using lighter aluminum alloys to construct their workshop jacks. This is now a fully capable material that is fast becoming much more popular than the old style steel jacks.
Safety is a much more considered factor when purchasing a jack these days too. Many built-in safety features are today considered a ‘must have.’ Overload valves are now fitted to most floor jacks to prevent you from mistakenly lifting a vehicle beyond the manufacturer’s stated capacities.
Slow release mechanisms are mostly installed to allow for the slow and controlled lowering of your vehicle. Aluminum used in jack construction is always totally reinforced, and often it is of aircraft build quality. For any jack in this review that has any of these features included we have stated so.
Low Profile Capabilities…
If you have a specialist vehicle such as a lowered custom, a high-performance sports car or even a race vehicle, then you will probably be after a jack with low profile lifting capabilities. By this, we would mean a jack that can reach under any vehicle that sits 4 inches or closer to the tarmac.
All of the best aluminum floor jacks for garage use in this review can manage this. Some can go lower than others though so we have stated minimum and maximum lifts heights to help you with your own judgment.
We, from our own experience as well as from buyer feedback will state that we really do prefer to see carry handles when fitted, to be done so in the centre of the jack chassis. It seems that manufacturers are still positioning them towards one end of the unit.
This is very frustrating. All of these floor jacks are of an acceptable lifting weight. However, if the handle position is not central, then the jack becomes top heavy when you are carrying it. This, in turn, makes it awkward and may even require both hands.
When positioning your jack to the underbody work another feature we like to see it a fully rotational saddle. Only five of the ten jacks here have this. The others are fixed in a single position. There is not always a lot of space under your vehicle to allow for the easy positioning of the saddle for lifting.
A fixed saddle pad means you must release and raise again if it is not in the correct place where as one able to rotate it can be adjusted without this need.
So, we’ve covered just a few points we feel need considering when making your purchase. We hope this can help you to make your final judgment.
So, What’s The Best Aluminum Floor Jacks For Garage Use?
So, there you have our full rundown of what we think are the best aluminum jacks for use in garages or workshops currently available. The pick of the bunch for us though must be the…
This really is a super lightweight jack that has a 3-ton lifting capacity. It has low-profile raising abilities and is a very versatile jack with an excellent lifting range of both height and weight. We feel this is a jack that could be used by the professional or hobbyist alike.
At the end of the day, we leave the final choice down to you. All of these jacks are up for the job. So you need to decide which one is up for your particular job!
Until next time, cheers guys. See ya.