This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.
Hi guys, today we’ll be taking a look at what we think is the best LVLP spray gun on the market right now. We are focusing on those of you that are after a ‘low volume-low pressure’ air spray gun for automotive bodywork.
But, all of the guns you see here today would be fine for spraying other projects you may have to do such as in woodworking, around the home, furniture, or even marine work.
So, please read on and will give you a small insight into the world of air gun spraying. Follow us through to the buyers guide after we have looked at the in-depth reviews of each of the six sprayers.
If you are just starting out in this field or have a project in mind, then we hope to help find the best LVLP spray gun for you…
Top 6 Best LVLP Spray Gun To Buy In 2021 Reviews
1 Astro EVOT14 Spray Gun
The Astro EVO-T14 is a gravity fed spray gun with a plastic paint cup holder. The two main features this gun offers are, firstly, it has an ‘air curtain’ design to help to minimize overspray and pollution. Plus, there is superior transfer efficiency that will reduce paint consumption.
The body of this gun is equipped with a forged, anodized cover for a longer tool life and corrosion protection with internally coated passages. A stainless steel needle with a fluid tip is slick finished for fast and easy cleaning.
The tip is 1.4 mm with quick thread technology, thus allowing for ease of use and compatibility with the cup system.
Easy to use and to clean…
The cup itself is disposable. When you have finished spraying you quick release the cup, drain any excess paint then discard it. So then you just need to concentrate on cleaning the gun itself.
While spraying, you need a gun that can be adjusted quickly and with an easy trigger release. So, the Astro has a ‘soft trigger pull’ in place to reduce finger fatigue, and the adjustment knobs are lubricated for great control during the spraying process.
No unwanted paint drips…
Advanced CNC machining has been used so there is no gasket necessary behind the tip. This avoids paint build up, and those very unwanted paint drips.
The Astro gun uses low air pressure for the best results at about 29 lbs at the gun. So work to the ‘low volume-low pressure’ method and gain a fine atomized mist. This will use less paint but give you a great even cover and a super finish. But, the low pressure, however, does result in a slow feed.
- A light and easy to use gun.
- ‘Air curtain’ design reduces overspray.
- You need to spray at a slow speed.
2 SPRAYIT SP-33500K Spray Gun Kit
Now we are taking a look at a complete spray gun kit. Produced by Sprayit, it is an all gravity fed kit that includes two guns, two cups, a regulator, different sized nozzles, attachments, and fitment tools.
The kit can be used for a variety of different applications. In the world of the automotive user, these guns are suitable for full body re-sprays as well as for painting single panels, detailing or touch-ups.
Less overspray and waste…
The LVLP feature means less air is needed, which in turn means the need for only a small size air compressor. Therefore, overspray and waste are reduced considerably. You can cover large surfaces without the annoyance of having the need to stop and wait for your air pressure to build up again and again.
The guns are both made from one-piece lightweight aluminum casts. There is a mini-gun with a 120cc cup. So, for difficult to reach areas like the door shuts or an engine bay this is a nice light unit for good access. And, the larger gun has a 20 oz/ 0.61 cup capacity. The cups are reusable.
And, there’s more…
The needles and nozzles are stainless steel and corrosion resistant. They are fitted with separate and adjustable air controls to make for precise fan patterns and to avoid waste. Working pressure is from 28-45 psi with a maximum of 60 psi.
For the best results and an evenly coated finish, lower pressures are recommended. The higher the pressure, the more you will risk paint drips, and a faster paint build up. This put you in danger of both an unwanted orange peel finish or those dreaded paint runs.
A good, capable gun that will give you long periods of spray time. Oil and water based paints are both able to run through this gun. The 2.00 mm tip included is suggested for the best quality finish on larger areas.
- A complete kit that includes all the accessories.
- Lightweight guns.
- Slow spray process.
3 SPRAYIT SP-352 Spray Gun
Again, a gun offered by Sprayit. Here we have a one-piece lightweight aluminum gun body with a 13.5 oz/0.41 aluminum cup.
This is a small size spray gun that, for automotive work is most suitably for detailing work. A great little gun that is very maneuverable. The swivel cup allows you to rotate as you spray to avoid knocking or scraping freshly painted areas while you are operating in tight spots.
Suitable for all types of paints…
The nozzle and stainless steel fluid needle are corrosion resistant. And, all types of paints are able to flow through this gun, and after use, it is easily cleaned. There is a separate and adjustable fluid fan pattern that ranges from 5.5 up to 7.5 inches in coverage.
Air adjustments will make for much more control to getting your precise desired fan pattern and will also reduce waste.
A good quick pace…
Working air pressure ranges from 44-58 psi with a maximum of up to 60 psi. Air consumption is from 4.2 to 6.0 cfm at 30 psi. So, this gun will work with a good quick pace for the movement needed to get into those tight spaces without getting paint runs.
While we are on the subject of air supply, let us point out to you that this gun uses an air hose with no quick disconnect.
The Sprayit SP-352 is a spray gun most usable for the quick coverage of smaller areas. Don’t expect a professional finish if you attempt to spray a whole car. The small size of this gun means it won’t hold the sufficient volume of paint for full bodywork painting.
- A good spray gun for detailing work in those hard to reach areas.
- The swivel cup rotates
- Not suitable for complete re-sprays.
- Air hose is not quick release.
4 SPRAYIT SP-31000 Spray Gun
We have chosen yet another Sprayit spray gun to review here. However, this is a different type of gun to the three previous ones we have looked at.
This is a larger sprayer unit with a 1000cc aluminum paint cup holder. This one relies on low volume air pressure to feed the paint from the gun. The air controls the precise application to your spraying area.
Air consumption is…
…from 3.5 to 3.9 cfm at 30 psi. The working pressure ranges from between 28-45 psi, and maximum pressure is at 60 psi.
Working within the recommended psi, this gun will give you a spray fan pattern from between 7 to 10.9 inches. And, separate winders fully adjust the fan pattern and the air/fluid mixture. A stainless steel fluid needle and nozzle are both corrosion resistant.
And, cleaning is an easy procedure…
The cleaning of parts afterward is an easy procedure. The cup release is easily done while the needle and nozzle are simple to remove and replace.
The air inlet hose is a 0.25-inch NPT connector.
For automotive body resprays, this would be a good gun to choose. It is fine for using all manner of lacquers, enamels, urethane, stains, low viscosity, and fast dry paints. For painting single panels to a full body respray the Sprayit spray gun is up to the job.
This is an economical unit that will feed you just the right amount of paint wanted onto the surface with the use of the adjustment controls.
- Good spray gun for full auto resprays.
- Economical use of paint.
- Can be used with many varieties of paints.
- Maybe cumbersome for spraying into tight spots.
5 Iwata 5552 hvlp-Sprayer
This is a spray gun offered by Iwata. We have here another gravity fed unit with a small size cup of 700ml capacity. So, a sprayer that is fully capable of doing detailing work such as around door shuts, trunk interiors or in the engine bay. Though covering larger panel bodywork would be a struggle.
Iwata’s patented LV technology provides for a fine atomization to your spray surface as well as lessening overspray. And, the compressor will be fine working with low air consumption and can operate at 9.5 cfm.
Constructed from cast aluminum with a stainless steel nozzle and needle that are easily removed for cleaning. The nozzle size is 1.4 mm. Plus, both solvent and waterborne paint products are fine to run through this spray gun.
It is designed for base and clear coat, single stage products. And, cleaning is no problem to do, and the paint cup has a secure but easy release fixture.
Suited to the home hobbyist…
This is a small paint capacity unit, and because of that, we feel apart from detailing vehicle bodywork it is a spray gun that would be more suited to the home hobbyist. Therefore, jobs like spraying furniture, clear coating woodwork, or just general touch up work would best suit the Iwata 5552 spray gun.
- Nice small unit for detailing.
- Low volume technology reduces overspray.
- Not suitable for full automotive resprays.
6 SPRAYIT SP-33000K Spray Gun Kit
The last unit we will look at in this feature is from Sprayit. Another spray gun with a full kit of components that is presented nicely in a plastic storage box.
This kit includes an SP-33000 Spray gun which has a one-piece lightweight aluminum body. And, there is a good choice of nozzle tip sizes at 1.3, 1.5, and 1.7 mm. The nozzles and needles are corrosion resistant.
So, what’s included…
The plastic paint cup has 20 oz volume. An air regulator, cleaning kit and adjustment wrenches come in the kit too.
On the gun itself, you have separate and adjustable fluid, fan pattern, and air controls. A good setup that, once adjusted, will give you a nice and precise coverage of paint to your surface. The fan pattern spreads from 7 to 10.9 inches, which is most suitable for bodywork coverage.
Requires less air…
The LVLP feature requires less air, which means you can use this quite comfortably with a smaller air compressor. Air consumption ranges from 3.5 to 3.9 cfm at 30 psi. For the best results, stick to the advised working pressure range from between 28 to 45 psi. But, it will max out at 60 psi.
This is a gravity fed gun that allows you to carry out full automotive bodywork resprays without having to stop for refills of paint every two minutes. And, the ‘low volume-low pressure’ system will give you more control of application with reduced overspray and paint wastage.
- Good size paint cup for spraying large surface areas.
- A good variety of nozzle sizes.
- Only one size of gun and cup in this kit.
Best LVLP Spray Gun Buyers Guide
Well now you have read our thoughts on the six best LVLP spray guns we’ve chosen, let us just give a bit of an insight into things we feel you need to know and consider before buying the best LVLP spray gun…
In the not so distant past if you had a big job that needed spraying, then there really was no choice but to get the professional in to do the work. Whether the said job was for automotive bodywork, external or internal house painting, woodwork finishing or whatever.
Equipment was expensive, and a high level of skill was needed to get great results. This is still true to a certain extent, but with the growing popularity of gravity fed LVLP spray guns now available, more and more hobby painters are able to tackle tasks that just a little while back would not have even been considered to do.
This style of spray gun is today very much affordable. The control of spraying and the quality of finish now possible has greatly improved. Lastly, as these are designed to spray under low air pressures, the need for a great big air compressor is no longer necessary.
First of all, what exactly is LVLP?
This stands for ‘low volume-low pressure.’ It means to start the gun will operate at low air pressures. This removes the need for running your gun through a big expensive air compressor unit. LVLP guns allow for non-professional painters to obtain a professional finish.
The other factor is the low volume painting. The low pressure, in turn, means less paint is pushed through the gun. But you will still get the satisfactory coverage you require.
What is a gravity fed gun?
The guns we have looked at today have a paint cup that is fixed to the gun from above. Gravity fed units drop the paint to the gun, so you only need air to push the paint out. Standard and larger spray paint cups are traditionally attached to the bottom of the gun.
Known as HVLP (high volume low pressure), air is used to siphon the paint into the gun and then more air is needed to push the paint out onto the prepared surface. This results in the need for much higher air pressures for continuous spraying
LVLP guns have considerable advantages to HVLP guns…
These guns are simple to use and have very few working components. Basically, you will get the gun body, paint cup, a spray nozzle, and a needle, that is it. Now, it is paramount to immediately clean these items after use. As long as this is done, then your gun will have a good long lasting life.
The finish you can get using an LVLP gun should be up to par with a professional painter. The amount of paint used is much less than with HVLP guns too, so, you will get much more coverage with the paint being used.
Very good for detailing work…
For automotive use, the size of these guns means they are very good for detailing work. What we mean by this is you can much easily get to the harder to reach parts of your vehicle.
Door edges and surrounds, trunk and under the hood areas can be covered much more easily. While reducing the risk of knocking fresh paint or getting so close with a heavy coverage that you will get paint runs.
These parts are also always an uneven surface. But, because an LVLP gun is much lighter and smaller, you can follow the bodywork contours much more freely than with the old style of spray gun.
You won’t be disappointed…
Whatever you are planning to paint, if you buy an LVLP spray gun, we don’t think you will be disappointed. It is a very inexpensive way to ‘do-it-yourself’ but still have your finished paint results look like a pro’s done the job.
One thing that may be a disadvantage to LVLP guns we feel we should point out is that due to the low pressures used to spray, they will struggle and even be unable to push out paints of a high viscosity.
This can be compromised by the thinning of some paints, though not really the ideal solution. And if you want to use thick materials such as latex you really will need a more powerful compressor and gun. This is when the old style HVLP still comes into play.
So, What’s The Best LVLP Spray Gun?
So, in conclusion, let us look at this from the automotive painter’s point of view. If you want a gun that can be used for detailing work and a gun capable of doing full body resprays then, without a doubt we would plum for the Best LVLP Spray Gun being the…
Why? Well, that is easy to answer. You get a full kit with all your needed equipment. A small and big sized gun and paint cup. So all jobs can be covered. Then there is a choice of nozzle size for different spray patterns. This makes it easily the best LVLP spray gun in this review.
If however, you did just want a single spray gun then we think the…
…model would fit the bill. It is fitted with an ‘air curtain’ feature that allows for great control of your spray area and vastly reduces overspray.
Happy painting guys, ‘til the next time, see ya.